Operation Manual

15
To turn on the meter, insert a test strip,
contact bars end first and facing up, into
the test port. Push it all the way in until
it will go no further.
“OneTouch UltraSmart” will appear briefly
on the display.
Then “Code 9 (Example), Check Code” is
displayed. Be sure the meter and test strip
codes match. If they do not, code the
meter correctly (see pages 10–12).
STEP 1
Insert a Test Strip into the Meter.
(Example)
Apply Blood
Control Solution
STEP 2
“Apply Blood” will appear on the display
first. Use the Arrow button to select
“Control Solution”. The meter will
automatically identify the test as a
control solution test in the logbook.
There are three choices in test mode. Use
the Arrow button to select one. Do Not
apply a sample until your choice appears
on the display.
• “Apply Blood” for fingertip blood sample.
• “Alternate Site” for forearm and palm
blood samples.
• “Control Solution” for checking the system.
Select “Control Solution”.