Operation Manual

STEP 4
Code the Meter.
Move up or down using the Arrow button
to the code number that matches the
code number on the test strip vial.
The new code number will flash on the
display for about three seconds, after
which the meter will prompt you to
“Apply Blood”.
12
Why you should do a control
solution test:
• OneTouch
®
Ultra
®
Control Solution
is used to check that the meter
and the test strips are working
together as a system and that you
are performing the test correctly.
• It is very important that you do
this simple check routinely to
make sure you get an accurate
result.
Checking the System with Control Solution
(Example)