Operation Manual
123
Connect the OneTouch
®
Interface Cable
to a serial port on the back of your
computer. With the meter turned on,
connect the OneTouch
®
Interface Cable to
the data port located on the upper left
side of the meter. Be sure the cable plug
is inserted all the way.
STEP 1
Install OneTouch
®
Diabetes
Management Software.
Install OneTouch
®
Diabetes Management
Software on your computer following the
instructions provided in the OneTouch
®
Diabetes Management Software User Manual.
Note: While in the communication mode, you will
be unable to perform a blood glucose test.
STEP 2
Connect the OneTouch
®
Interface Cable.