Operation Manual

Taking a test

Viewing your control solution result

After the control solution

is applied, the meter will

count down until the test

is complete. Your result is

displayed along with the date,

time, unit of measure, and

(for control solution) and stored in the meter.

Control solution results can be seen when reviewing past

results on the meter.

CAUTION: Make sure you press or until the control

solution icon

appears before you begin a control solution

test. Invalid results may be logged into your history if you

applied control solution to the test strip without following the

steps beginning on page60.

Yellow= 5mm Red=7mm margin

05983201A_OT_UPF_OB_mmolL_Inside_R2.indd 64 1/27/15 4:35 PM