Operation Manual

Taking a test

Disposing of the used lancet and test strip

Discard the used lancet carefully after each use to avoid

unintended lancet stick injuries. Used lancets and test

strips may be considered biohazardous waste in your

area. Be sure to follow your healthcare professional's

recommendations or local regulations for proper disposal.

Wash hands thoroughly with soap and water after

handling the meter, test strips, lancing device and cap.

Testing with control solution

Control solution testing precautions

OneTouch Ultra® Plus Control Solution is used to check that

the meter and test strips are working together properly

and that the test is performing correctly. (Control solution

is available separately.)

NOTE:

• Use only OneTouch Ultra® Plus Mid Control Solution or

OneTouch Ultra® Plus High Control Solution with your

OneTouchUltra Plus Flex™ Meter. Either level can be

used to check your system.

• When you first open a new vial of control solution,

record the discard date on the vial label. Refer to the

control solution insert or vial label for instructions on

determining the discard date.

Yellow= 5mm Red=7mm margin

05983201A_OT_UPF_OB_mmolL_Inside_R2.indd 58 1/27/15 4:35 PM