Operation Manual

26
2
Setting up your system
Adjusting the time and date settings after
first time setup
You can adjust the meter's time and date settings after
first time setup. Press and hold
to turn the meter on,
then press and hold and at the same time. The SET
screen will appear. See page74.
After adjusting the settings, your meter will exit settings
mode and your last result screen will appear.
Yellow= 5mm Red=7mm margin
Yellow= 5mm Red=7mm margin
05983201A_OT_UPF_OB_mmolL_Inside_R2.indd 26 1/27/15 4:35 PM