Operation Manual

25
2
Setting up your system
Setting the date
After completing the time setup, the meter will
automatically move to date setup.
Day will flash
• If the day displayed is
correct, press
to
confirm.
• If the day displayed is not
correct, press
or to
change the day and press
to confirm.
You are now ready to take
a test. See the section
Testing your blood glucose
in Chapter 3.
NOTE: After completing first time setup, a screen with
three dashes will appear. Once you begin testing, your last
result will appear in place of the three dashes, along with
the date and time the test was taken.
Yellow= 5mm Red=7mm margin
Yellow= 5mm Red=7mm margin
05983201A_OT_UPF_OB_mmolL_Inside_R2.indd 25 1/27/15 4:35 PM