Operation Manual

SETTING THE TIME AND DATE, AND CODING YOUR METER



Set the minutes

Press ▲ or ▼ to change the minutes. When you have the correct minutes on the display,

wait ve seconds to move to the next setting. The year (last two digits only), month and day

appear on the display and the year ashes.



Set the year

Press ▲ or ▼ to change the year. When you have the correct year on the display, wait

ve seconds to move to the next setting. The month will now start ashing.



Set the month

Press ▲ or ▼ to change the month. When you have the correct month on the display, wait

ve seconds to move to the next setting. The day will now start ashing.



Set the day

Press ▲ or ▼ to change the day. When you have the correct day on the display, wait ve

seconds to move to the next screen.

Your time and date settings will be displayed for ve seconds. After the ve seconds, the

settings will be saved and the meter will then turn o. If you want to adjust your settings,

press ▲ or ▼ while the time and date are still on the display. You will be returned to the

rst set-up screen where you can begin with the hour.

Downloaded from www.Manualslib.com manuals search engine