Operation Manual

3
Take a test
52
After getting a blood glucose result
Once you have your blood glucose result, you may:
• Press and hold
to return to the Main Menu.
• Press and hold
for several seconds until the meter
turns off. The meter will also automatically turn off if
left alone for two minutes.
Or,
• Remove the test strip and the meter will turn off.
Removing the used lancet
NOTE: This lancing device has an ejection feature, so you
do not have to pull out the used lancet.
1. Remove the lancing device cap
Remove the cap by turning
it counterclockwise and then
pulling it straight off of the
device.