Operation Manual

2
Set up your system
25
When the time is correct, press
to save.
If you need to make an adjustment,
press
or to highlight Edit and
press , then repeat Step 1.
A Saved screen appears to
confirm that the time displayed is
now stored in the meter.
2. Set the date
The Set Date screen will be
displayed next.
If the date is correct, press
to
save and continue to Step 3 to set
the general range limits.
If you need to edit the date, press
or to highlight Edit and
press .
Step 1 of 3
Edit
Save
OK?
16:45
Step 2 of 3
Set Date
30 Apr 2014
Edit
Save