SDS

Page 2 / 9
RD-0038OPP - Onetime Lightweight Spackling
Revision Date: 25-Sep-2013
Chemical Name
CAS No
Weight-%
Acrylic Emulsion
MIXTURE
<50
Soda lime borosilicate glass
65997-17-3
<15
Titanium Dioxide
13463-67-7
<1
Propylene Glycol
57-55-6
<2
* Unlisted ingredients are not considered hazardous under the OSHA Hazard Communication Standard (29 CFR 1910.1200).
(Calcium Carbonate, Titanium Dioxide, Ground Mica and Soda lime borosilicate glass) Inhalation of particulates unlikely due to
product’s physical state.
First Aid Measures
General Advice Provide this SDS to medical personnel for treatment.
Eye Contact Immediately flush with large quantities of water for at least 15 minutes until irritation
subsides. Get medical attention.
Skin Contact Wash w/ soap & water for @ least 15 minutes. Get medical attention if symptoms persist.
Remove & wash contaminated clothing.
Inhalation Remove to fresh air. If breathing is difficult, leave area to obtain fresh air. If breathing
remains difficult, get medical attention.
Ingestion Do not induce vomiting unless directed by medical personnel. If vomiting occurs, lean
patient forward to maintain an open airway & prevent aspiration. Get immediate medical
attention.
Most important symptoms and effects
Symptoms Prolonged or repeated skin contact may result in dermatitis (red, dry skin). Direct contact
with eyes may cause temporary irritation. Exposed individuals may experience eye tearing,
redness and discomfort. Irritating to mouth, throat, and stomach if ingested. May cause
gastrointestinal irritation, nausea, diarrhea, and vomiting. Overexposure to vapors during
application and curing may mildly irritate respiratory tract and result in coughing and
sneezing.
Indication of any immediate medical attention and special treatment needed
Notes to Physician Medical Conditions Aggravated by Exposure: Asthma & asthma-like conditions may worsen
from prolonged or repeated exposure to dust, should sanding be performed.
4. FIRST-AID MEASURES
3. COMPOSITION/INFORMATION ON INGREDIENTS