MSDS

RD-0037-CA - Onetime Spackling – ½ pint, Quart & Pint
Revision Date: 23-Apr-2014
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Page 2 / 7
3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name
CAS No
Weight-%
Acrylic Emulsion
MIXTURE
30-60
Soda lime borosilicate glass
65997-17-3
10-30
Inhalation of particulates unlikely due to product’s physical state.
4. FIRST-AID MEASURES
General Advice
If exposed or concerned: Get medical advice/attention.
Eye Contact
Immediately flush with large quantities of water for at least 15 minutes until irritation
subsides. Get medical attention.
Skin Contact
Wash affected areas thoroughly with soap and water for at least 15 minutes. If skin irritation
persists, call a physician. Take off contaminated clothing. Wash contaminated clothing
before reuse.
Inhalation
Remove to fresh air. If breathing becomes difficult, call a physician.
Ingestion
Do not induce vomiting without medical advice. If vomiting occurs naturally, have victim
lean forward to reduce risk of aspiration. Call a physician or poison control center
immediately.
Notes to Physician
Treat symptomatically.
5. FIRE-FIGHTING MEASURES
Flammable properties
Not flammable.
Flash Point
> 200 °F / > 93 °C
Suitable Extinguishing Media
Carbon dioxide (CO2). Dry chemical. Foam. Water spray (fog). Use extinguishing agent
suitable for type of surrounding fire.
Unsuitable Extinguishing Media
None known.
Hazardous Combustion Products
Carbon oxides. Nitrogen oxides (NOx).
Explosion Data
Sensitivity to Mechanical Impact
None.
Sensitivity to Static Discharge
None.
Specific Hazards Arising from the
Chemical
None known.
Protective equipment and
precautions for firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH
(approved or equivalent) and full protective gear.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions
Wear protective clothing as described in Section 8 of this safety data sheet.
Environmental Precautions
Prevent entry into waterways, sewers, basements or confined areas.
Methods for Containment
Gently cover spill with polypads.