Users Manual

14/20 OTX-18.US Datasheet Rev H
Environmental Specifications
9.1 Environmental Compliance
This OTX-18 module is produced in compliance with the Restriction of Hazardous Substances
(RoHS) and Halogen-Free (HF) directives. The Onethinx module and components used to
produce this module are RoHS and HF compliant.
9.2 RF Certification
The OTX-18 module will be certified under the following RF certification standards at
production release.
■ FCC: 2AUBKOTX-18
■ CE
■ IC: ?????-????
9.3 Environmental Conditions
Environmental Conditions Table 26 describes the operating and storage conditions for the
Onethinx module.
Description
Minimum
Maximum
Units
Operating temperature
-35
85
°C
Operating humidity (relative, non-condensation)
5
85
%
Thermal ramp rate
-
3
°C/minute
Storage temperature
-55
155
°C
Storage humidity
85
%
Table 10: Environmental Conditions for the OTX-18 module
9.4 ESD and EMI Protection
Exposed components require special attention to ESD and electromagnetic interference (EMI).
A grounded conductive layer inside the device enclosure is suggested for EMI and ESD
performance. Any openings in the enclosure near the module should be surrounded by a
grounded conductive layer to provide ESD protection and a low-impedance path to ground.
Device Handling: Proper ESD protocol must be followed in manufacturing to ensure component
reliability.