Specification Sheet

Table Of Contents

While seated, lean forward, lifting your body weight from

the seat. Reach underneath the right side of chair and

locate the handle. Lift the handle up slowly to allow the chair

to rise to the desired height. To lower the seat height, lift the

handle while seated.

TO ADJUST SEAT HEIGHT

Reach under the front center of the chair seat and grasp the

round black tension knob. To loosen the tilt mechanism,

recline the back cushion of the chair. To tighten the tension

knob, rotate counter-clockwise. Rotate the knob until the

desired resistance is reached.

TO ADJUST TILT TENSION

Right

Handle

STEP 5

Align the back cushion (1) with the holes in the armrests and

secure it with four screws (D). Fully tighten the screws from

step 4.

STEP 6

Place four screw caps (F) over the screws at the bottom of the

arms. Place the two arm covers (G) over the round sections on

the arms and rotate them clockwise as shown below.

Round tension

knob

ASSEMBLY AND FUNCTION INSTRUCTIONS