™ OneSpace is a Trademark of Comfort Products, Inc.
Desktop maximum weight capacity = 110 lbs.
PARTS AND HARDWARE LIST EXTRA HARDWARE INCLUDED FOR YOUR CONVENIENCE. ITEMS ARE NOT SHOWN TO SCALE.
ASSEMBLY INSTRUCTIONS STEP 1 Screw the Feet (E) into the Legs (1 & 2).
ASSEMBLY INSTRUCTIONS DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED STEP 2 Attach the Legs (1& 2) to the Desktop Frame (3) and the Back Bar (4) using eight Screws (B) and eight Washers (D). Make sure the screw holes circled below are facing the back. Do not tighten the screws completely until the Desktop (6) is attached. Bx8 Dx8 F 3 1 These holes should face the back.
ASSEMBLY INSTRUCTIONS DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED STEP 3 Attach the Support Bars (5) to the Desktop Frame (3) and Back Bar (4) using four Screws (C).
ASSEMBLY INSTRUCTIONS DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED STEP 4 Attach the Desktop (6) to the legs using four Screws (A) and four Washers (D). If the Screws (A) will not line up correctly, loosen the screws from steps 2 and 3. After aligning all four screws for the Desktop, tighten them completely and then do the same with the other screws.
SAFETY AND MAINTENANCE • DO NOT stand on the desk. Do not use the desk as a stepladder. • • Every 6 months, check all bolts and screws to ensure they are tight. LIMITED WARRANTY PLEASE VISIT WWW.COMFORTPRODUCTS.NET FOR WARRANTY INFORMATION Comfort Products warrants this product to be free from defects in material and workmanship for one (1) year.