Hardware Manual

onesc re e nso lu t i ons. c om | +1 858.552.0290 | U n i t ed S t ate s| Pa k i st an | Colom bi a | Mexico | UA E
4
3. Safety First!
3.1. General
Read and understand all safety information, operating instructions, and product labels before
operating the equipment. Keep this guide in a safe place for future reference.
 The lightening flash with arrow-head symbol, within a triangle, is intended to alert the user to the
presence of “dangerous voltage” within the product’s enclosure that may be sufficient to constitute
a risk of electric shock to persons.
 The exclamation mark within a triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions.
 To reduce the risk of fire or electric shock, do not expose this product to smoke, rain, dust or
moisture!
 To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside.
Refer servicing to qualified service personnel.
 This product is designed and manufactured to operate within defined design limits, and misuse may
result in electric shock or fire.
 The installation of this product should be completed by an OneScreen Trained Installer.
3.2.
Safety Information - OneScreen
 Inspect OneScreen for any physical damage to the casing before use. If damage is apparent, take care
to avoid contact with any potentially live parts.
 Do not under any circumstances try to gain access to internal parts of OneScreen. If you suspect that
the device is damaged or faulty, you should contact Technical Customer Support, or an authorized
OneScreen service agent for advice.
 Always use accessories recommended by OneScreen to ensurecompatibility.
 Only use the power cable that is compatible with your mains outlet socket. If you are unsure of the
electrical compatibility of your equipment, please contact OneScreen or an authorized OneScreen
service agent before attempting to connect the device to the mainssupply.
 Use a wall socket that is close to OneScreen and that is easily accessible.
 Firmly insert the power plug into the wall socket. Partial connection could cause sparks.
 To avoid the risk of electric shock or component damage, disconnect OneScreen from the power
supply before plugging in any other cables.
 Hold the power plug when unplugging the device. Pulling the power cable may damage the wires
inside the cable and cause fire or electric shock.
 To avoid the risk of electric shock, do not touch the power plug with wethands.
 Unplug the power plug before cleaning OneScreen.