Product Manual

6.
9.
Other Options for Securing Dust Deputy® to Vacuum
Strap to Vacuum
Velcro to Dolly
Bolt to Attached Platform - This works
best with large wet / dry vacuum.
Home-Built Carts
Bolt Bucket to Dolly
Courtesy of John Miller / www.workshopaddict.com
1.) Place supplied gasket on plastic drum top,
lining up holes in gasket with holes in lid.
3.) Snap lid tightly on drum
and you’re ready to go.
A
B
4.) Attach provided hose from
shop vacuum to top outlet on
cyclone (A). Use shop vacuum
hose to attach to tools. (B).
2.) Install metal tape then place bolt through
washer then put bolt through hole in base of
cyclone. Secure with nut underneath. Tighten
evenly. Do not over tighten bolts.
For additional static reduction,
install metal tape as shown.
The Dust Deputy® is molded from an anti-static resin.
For added grounding, attach wire to bolt between bolt head and washer,
then attach another washer to end of wire. Wire must be long enough for
washer to lie at on oor.
Bolt
This hardware not provided.
Cover bolt hole and use
the bolt for the grounding
wire anchor.
Tape should wrap
around Inlet and
Outlet as shown.
Wire
Washer
Foil Tape
Washer
Floor
Base
Gasket
Nut
(Ring Terminal Recommended)
Use included elbow on the shop
vacuum inlet or on the outlet of
the cyclone.
Elbow
Assembly Instructions (Cont.)