User's Manual

Part Number 110449
Revision Date: January 18, 2011
Magswitch E50 900/660 CE w/Remote
Operating Instructions cont’d
Lockout Mechanism
o This cordless electric lifter is equipped with a control lockout mechanism which is triggered while the unit is under load
o When lifting a load, this lifter’s controls will not function manually or remotely until the load is completely supported, and the
lift ring is resting on the top of the unit
o To enable the electronics, the ring must not be supported by any chains, cables, shackles, or other method of attachment
Actuating the magnet remotely “ON” (Must Have External Antenna Installed)
o Ensure magnet is positioned correctly in full contact with target
o Ensure power is on (Power button light is active)
o Press green ON button on remote once to actuate magnet
o LOOK for amber lights to become active on indicator light dome
o LISTEN for motor sound
o TEST small lift before moving load
Actuating the magnet manually “ON”
o Ensure magnet is positioned correctly in full contact with target
o Ensure power is on (Power button light is active)
o Press green ON button once
o LOOK for amber lights to become active on indicator light dome
o LISTEN for motor sound
o TEST small lift before moving load
A. Controls Active (Lockout
Disengaged) Note Fastener
Heads Visible
B. Controls Inactive (Lockout
Engaged) Fastener Heads
Hidden, Gap Visible Below Ring