User's Manual

35 - English
OPERATION
SAFETY SENSOR DIAGNOSTIC FEEDBACK
LED FUNCTIONS
RED LED
(TRANSMITTER)
GREEN LED
(RECEIVER)
PROBLEM SOLUTION
ON ON
No problem indicated No action required
OFF OFF
Garage door operator is unplugged or
the battery is depleted
Wires from garage door operator may
be damaged
Wires not connected
Wires connected to the wrong terminal
One or both sensors are defective
Connect to power supply or charge
the battery pack
Replace damaged or broken wires
Connect wires to garage door
operator
Connect wires to the correct terminal
Contact customer service or a
qualified service center for assistance
OFF ON
One or both sensors are defective
Contact customer service or a
qualified service center for assistance
ON OFF
The safety sensors are out of alignment
The safety sensors are obstructed
One or both sensors are defective
Safety sensor (receiver) is in direct
sunlight
Safety sensor (transmitter) is not
sending beam
Align the safety sensors
Remove all objects between the
safety sensors
Contact customer service or a
qualified service center for assistance
Change the position of the sensor
Contact customer service or a
qualified service center for assistance