User's Manual

4 — English
App images may vary.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
If any parts are damaged or missing, please call 1-877-578-6736 for assistance.
ASSEMBLY
OPERATION
INSTALLING/REPLACING THE BATTERIES
See Figure 1.
Three AA batteries are preinstalled. Before first use, locate
and remove the red pull tab to activate the batteries.

Disconnect the device from your smartphone.

Slide the battery cover off.

Install batteries according to the polarity indicators.

Replace the battery cover, making sure it is secure before
use.

Do not operate the device without the battery cover in-
stalled.
NOTE: Remove the batteries for storage when device will
not be used for long periods of time.
ATTACHING THE CLIP
See Figure 2.
The clip expands to fit most smartphones. Always install
the clip before attaching your smartphone.

Align the hook-and-loop sections of the inspection scope
to the matching portion of the clip.

Make sure the two notches match and line up.

With both thumbs, press the clip in the middle until you
hear a “click”.

Make sure clip is securely attached to the inspection
scope.
Fig. 1
Fig. 2