Operator's Manual

11 - English

MOTOR

HOUSING CAP

INSTALLATION

MOTOR

HOUSING HOLE

 Carefully feed the fan’s electrical wiring through the motor

housing cap, then install the cap as shown.



Install the clevis pin through the holes in the motor hous-

ing and the downrod, then reinsert hitch pin. Retighten

the lock screws to secure.

LOCK SCREW

DOWNROD

 Thread the downrod into the motor housing until it bot-

toms out, then back it out until the hole in the downrod

aligns with the hole in the motor housing. Be careful not

to twist the electrical wiring when tightening.

HITCH PIN

MOTOR HOUSING

CLEVIS PIN

LOCK SCREW

DOWNROD HOLE

 Carefully feed the fan’s electrical wiring through the

canopy screw cover ring and canopy, then install the

cover ring and canopy on the downrod as shown.

NOTE: Make sure the notched openings on the rim of the

canopy screw cover ring are facing up.

CANOPY

CANOPY SCREW

COVER RING

NOTCHED

OPENINGS