User manual

4. Technical Information
4.a. Dip switch configurations
The following dip switch configurations are required for proper board operation in network and I/O architectures.
To operate the boards in a network scheme, the dip switches of the two boards must be set in option A (Host) and option B
(Target) configurations.
To operate the boards in an I/O scheme, the dip switches must be set in option A (Host) and option C (Target) configurations.
The following diagrams show the dip switch settings
more visibly:
NOTE: Option D is a factory setting and is not for user configuration
One Stop Systems OSS-PCIe-HIB35-x4
Page 7