User manual

One Stop Systems OSS-PCIe-HIB25-x4-H/T
Rev. A
1. Overview
1.a. Unpacking Instructions
1) If the carton is damaged when you receive it, request that the carrier’s agent be present when you unpack and inspect
the equipment.
2) After unpacking, verify that all items listed in the packing list are present.
3) Inspect the equipment for shipping damage.
1.b. Product Description
The PCIe x4 Gen 2 cable adapter is a PCIe half-height add-in card with a PCIe x4 cable connector on the slot cover. The
host cable adapter installs in the PCIe slot of a host server and the target cable adapter installs in the target slot of the OSS
2-slot backplane. Both are sold separately or together with the 2-slot backplane in a kit (OSS-KIT-EXP-3000-2M)
1.c. Specifications
Dimensions (H x L): 2.7 x 3.1 inches (68 x 78mm)
Front Panel Connectors: One PCIe x4 cable connector
Front Panel Indicators:
Power On / Cable Present: LEDs
Power Consumption (designed to meet the following conditions): 3.75W typical, 3.3@1.3A
Operating Environment (designed to meet the following conditions)
Temperature Range: 0° to 50°C (32° to 122°F)
Relative Humidity: 10 to 90% non-condensing
Shock: 30g acceleration peak (11ms pulse)
Vibration: 5-17 Hz 0.5” double amplitude displacement; 7-2000Hz, 1.5g acceleration.
Redriver: Pericom PI2EQX5804
Agency Compliance: UL60950.FCC Class B, CE
Slot Cover
(Also
available in
low profile
height)
Power on /
Cable Ready
LEDs
PCIe x4
Connector
Power on LED
Cable present LED
Note: This area is populated on
target board
Page 1