User's Manual

SPECIFICATIONS TABLE
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, op-
erating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside
of the front cover. Keep this manual and invoice in a safe and dry place for future
reference.
PRODUCT OVERVIEW
The Fence Control is designed to keep only animals confined to a specific area by
emitting an electrical shock. Do not use this product for any other purpose.
GENERAL SAFETY WARNINGS AND PRECAUTIONS
1. KEEP WORK AREA CLEAN AND DRY. Cluttered, damp, or wet work areas
invite injuries.
2. KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle
this product.
3. STORE IDLE EQUIPMENT. When not in use, tools and equipment should be
stored in a dry location to inhibit rust. Always lock up tools and equipment, and
keep out of reach of children.
4. DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS. Read warning labels on prescriptions to determine if your judgement or
reflexes are impaired while taking drugs. If there is any doubt, do not attempt to
use this product.
5. USE EYE PROTECTION. Wear ANSI approved safety impact eyeglasses when
using this product. ANSI approved safety impact eyeglasses are available from
Harbor Freight Tools.
SKU 47454 PAGE 2
6. INDUSTRIAL APPLICATIONS MUST FOLLOW OSHA REQUIREMENTS.
ITEM DESCRIPTION
Input Voltage 8.7 VDC
Output Voltage 8 KV +/- 1.5 KV
Battery Type 6 Volt, DC, Lead Acid, 4.5 AH
Range of Fence Control 3 to 5 Miles (Single Strand Wire)
Solar Panel Type Angle Adjustable
Solar Panel Size 4-1/4” x 3-3/4”
Rated Wattage In Full Sunlight 1.3 Watts
Overall Dimensions 7-1/4” x 6-7/8” x 5-3/8”
Weight 3.65 Lbs.
REV 08e