JUMP STARTER OAJS-1201 Instruction manual Before using the product, please read this instruction manual carefully and keep it for future reference. Note: There may be small differences between the images shown here and the product itself.
1. This product was designed for 12V lead acid/AGM/Gel batteries/vehicles only. 2. DO NOT connect the red and black clamps together. It will short circuit the jump starter 3. Do not disassemble the jump starter 4. Keep away from children. It is not a child’s toy 5. Store in a dry place. Do not store in damp conditions and keep away from corrosive materials. 6. If the jump starter expands, leaks, or smells during use, stop and shut down immediately 7. Please use the jump starter in a normal environment.
Battery Capacity: 44.4Wh Peak Current: 1200A Dimensions: 227*101*59 mm Type-C Input: 5V/3A; 9V/3A; 12V/3A; 15V/3A; 20V/3.25A Output USB-C: 5V/3A; 9V/3A; 12V/3A; 15V/3A; 20V/3.25A Output USB1: 5V/3A; 9V/2A; 12V/1.5A Output USB2: 5V/2.4A Output DC: 12V/10A Max 1. LED Light 2. Power Button 3. Engine "START" Button 4. LED Light Button 5. Engine Force Start Button 6. Screen Display 7. Jump Start Port 8. USB1 Output 9. USB2 Output 10. Type-C Input/ Output Port (IN/ OUT) 11.
DC PD USB 1 USB 2 IN OUT % READY USB 1 USB 2 1. When a USB is connected and charging, this will be displayed DC 2. When a DC cable is connected and charging, this will be displayed PD 3. When a USB-C cable is connected and charging, this is displayed. PD 4. When charging the jump starter, with a USB-C, this is displayed. 5.
Jumper Cable ×1 Jump Starter x 1 Packaging User Manual x 1 Type-C Cable (IN/OUT) ×1 USB A + USB C USB Cable (OUT) ×1
USB 1 USB 2 Type-C (In/Out) Plug in any compatible USB to USB1, USB2, or Type-C Plug in the phone or other device 3s Press the Button Type-C (In/Out) Press the power button to start charging
80 1 2 3 READY Insert the jumper cables into the jump starter and connect the clamps to the car battery. (Red to positive/ Black to negative) Press the power button, then press START button The screen will blink a green “READY” FORCE START 4 Once solid green, start the car engine PRESS 3 SECONDS If your car battery is in low voltage (below 2V), press and hold the button for 3 seconds (screen will display “READY” in green) to force start your car.
"READY" icon green and red flashing Jumper cables are connected to jump starter Disconnect jumper cables (not in use) - or Connect clamps to car battery "READY" solid green Jumper clamps are connected to the car battery Ready to jump start your car If the above operations cannot start your car, please use the force start function Press and hold the "Engine Force Start" button for 3 seconds, the green "READY" will be solid Ensure the correct connection of clamps before using force start function, hol
a solid red "READY" and beeping ; The voltage will automatically cut out Automatically cut off output after 45 seconds Turn it back on & and it has not started follow the while the solid red instructions "READY" is visible When the jump starter is outputting lower than 13.0V, there will be no output.
The charge is low and needs recharging unit to rechearge it. "H8" displays on the screen High temperature protection, stop working at this time Automatically recover when the temperature drops "H0" displays on the screen Low temperature protection, stop working at this time Automatically recover when the temperature increases 6. Make sure to connect the jumper cables to the correct terminals. DO NOT start the car with the incorrect clamps to the opposite terminals.
A: The decive will automatically shut down after 30 seconds of idle use. (no charge happening) What is the lifespan of Jump Starter? 500 cycles or full charges.(It can still be used after 500 cycles, but the capacity remains at about 80%.
WARRANTY INFORMATION: 1. We o f f e r a l i m i t e d wa r r a n t y f o r t h i s p r o d u c t a g a i n s t a ny d e f e c t s i n m a t e r i a l a n d wo r k m a n s h ip for a period of 12 months since the da te of the factor y. The conditions of the war ranty are as follows. 2. The war ranty is only valid upon pre s e n t a t i o n o f t h e original receipt (from dealer/retailer) by the original purc haser with the product to be repaired or replaced. 3.
