MSDS

ManualsBrandsOne Match ManualsKitchenGelled Fire Starter

Material Safety Data Sheet

U.S. DEPARTMENT of Labor

May be used to comply with Occupational Safety and Health Administration

OSHA's Hazard Communication Standard, (Non-Mandatory Form)

29 CFR 1910.1200 Standard must be Form Approved

consulted for specific requirements.

OMB No. 1218-0072

IDENTITY (As Used on Label and List)

CODE 47,48,49,49Q

ONE MATCH GELLED FIRE STARTER

Section I

Manufacturer's Name Emergency Telephone Number

RUTLAND PRODUCTS

CHEMTREC 800-424-9300

Address (Number, Street, City, State, and Zip Code) Telephone Number Information

217-245-7963

7 CRAB TREE ROAD

Date Prepared Date Revised

JACKSONVILLE, IL 62650

June 1991

Nov., 04

Signature of Preparer (optional)

Section II - Hazardous Ingredients/Identity Information

Chemical Identity CAS # OSHA PEL ACGIH TLV

Other Limits

Recommended

% (optional)

2-Propanol 67-63-0 400 ppm 400 ppm

HMIS Rating - Health: 1 Flammability: 3 Reactivity: 0

Section III - Physical/Chemical Characteristics

Boiling Point Specific Gravity (H

O = 1)

180°F 0.79

Vapor Pressure (mm Hg)

33 mmHg

Melting Point

at 20°F -128°F

Vapor Density (Air = 1) Evaporation Rate

(Butyl Acetate = 1)

2.10 2.0

Solubility in Water

Miscible

Appearance and Odor

Light blue gel; alcohol smell

Section IV - Fire and Explosion Hazard Data

Flash Point (Method Used) Flammable Limits LEL UEL

54°F (TCC) 2 12

Extinguishing Media

Alcohol-type or all-purpose type foam, carbon dioxide, dry chemical, water fog

Special Fire Fighting Procedures

Use water spray to cool fire-exposed containers and disperse vapors.

Unusual Fire and Explosion Hazards

Vapors may be moved by air currents or settle in low spots.

Note: Blank spaces are not permitted. If any item is not applicable, or no

information is available, the space must be marked to indicate that.

The information presented herein is based either on data or opinion. Such data is, to the best of our knowledge, true

and accurate. Such opinion is believed to be expert, and therefore generally reliable, but in some instances there are

conflicts in expert opinion and in these instances we have relied on the opinion which, in our best judgment, appeared

the most reasonable. All information herein is presented without guarantee or warranty and Rutland Products disclaims

any liability incurred from the use thereof.

Summary of content (2 pages)

PAGE 1
Material Safety Data Sheet U.S. DEPARTMENT of Labor May be used to comply with OSHA's Hazard Communication Standard, 29 CFR 1910.1200 Standard must be consulted for specific requirements. Occupational Safety and Health Administration (Non-Mandatory Form) Form Approved OMB No. 1218-0072 IDENTITY (As Used on Label and List) Note: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that.
PAGE 2
Section V - Reactivity Data Stability Unstable Conditions to Avoid Stable Avoid excessive heat, open flame and all ignition sources. X Incompatibility (Materials to Avoid) Concentrated nitric and sulfuric acid, caustics, strong oxidizing agents.Aluminum at high temperatures. Hazardous Decomposition or Byproducts Burning may produce carbon monoxide and/or carbon dioxide.