Owner's Manual

B  SET UP BY CODE
If your brand is not listed in section A, you can set up your device by trying codes
individually. To do this:
1. Turn your device on (not on standby).
2. L o cate the brand of your device in the code list (pages 130-149).
Codes are listed by Device Type and Brand.
3. Hold down MAGIC until the LED under the device blinks twice.
The LED under the current mode key will stay lit.
4. Press the DEVICES key repeatedly until the LED for the device you
want to set up is lit.
5. Enter the first 4 digit code listed for your brand (e.g. 0556 for a
Bennett TV).
6. The LED will blink twice and go out.
7. Now aim the remote towards your device and press the POWER key.
8. If the device turns off, your remote is ready to use. If not, repeat steps 3-7
with the next code in the list.
* Some codes are quite similar. If you find that one or more keys do not operate as you expect, try again from step 3
with the next code in the list.
HOW TO SET UP YOUR REMOTE