Owner's Manual

B – SET UP BY CODE
If your brand is not listed in section A, you can set up your device by trying codes
individually. To do this:
1. Turn your device on (not on standby).
2. Locate the brand of your device in the code list. Codes are
listed by Device Type and Brand.
3. Hold down MAGIC until the LED under the device blinks
twice. The LED under the current mode key will stay lit.
4. Press the DEVICES key repeatedly until the LED for the
device you want to set up is lit.
5. Enter the first 4 digit code listed for your brand (e.g. 2049
for a Insignia TV).
6. The LED will blink twice and go out.
7. Now aim the remote towards your device and press
the POWER key.
8. If the device turns off, your remote is ready to use. If not, repeat steps 3-7
with the next code in the list.
* Some codes are quite similar. If you find that one or more keys do not operate
as you expect, try again from step 3 with the next code in the list.