User Guide

USER’S GUIDE
Using Keymover 37
PROGRAMMING KEYMOVER
For example, if your DVD player does not have volume control, you can map
those keys (i.e., VOL
, VOL , and MUTE) from the TV mode to DVD mode:
2. Press OTHER once. The Other programming screen appears:
7. For the destination key, press a key to be moved once. For this example
press VOL
once.Upon keymoving, the two bottom IR segments
flash twice as confirmation. The Program Keys appear again.
8. Repeat steps 2 through 7 two more times to map the remaining volume
control keys, substituting VOL
and MUTE as source and destination
keys in steps 5 and 7.
9. Exit programming by pressing HOME once. The display returns to the
last-selected device menu screen
.
You can now use your OFA Kameleon 8-Device Remote with RF to control the
TV’s volume and mute in the DVD mode, as well as in the TV mode.
1. Press and hold SETUP until the two bottom IR
segments flash twice. The Program Keys
appear as SETUP flashes repeatedly
3. Using the Number Keys, enter 9 9 4. The
two bottom IR segments flash twice.
4. For the source mode, press a device key
once (i.e., AUX, CD, etc.). For this
example, press TV once. The source device
menu screen, including HOME, appears.
5. For the source key, press a key to be moved
once. For this example press VOL
once.
6. For the destination mode, press a device
key once (i.e., AUX, CBL/SAT, CD, TV, DVD,
AUDIO, VCR, or PVR). For this example,
press DVD once. The selected destination
device menu screen, including HOME,
appears.
OFA Kameleon wRF UG rev 3.fm Page 37 Monday, September 13, 2004 11:18 AM