Operation Manual

KAMELEON 8-DEVICE REMOTE WITH RF
28 Changing Volume Lock
2. Press VOL once.The Volum e Lock programming screen appears:
UNLOCKING VOLUME CONTROL FOR A SINGLE DEVICE
(INDIVIDUAL VOLUME UNLOCK)
2. Press VOL once.The Volum e Lock programming screen appears:
3. Press a device key once (i.e., AUX, CBL/
SAT, CD, TV, DVD, AUDIO, VCR, or PVR)
where you want the volume controls
locked to.The two bottom IR segments
flash twice and the Program Keys
appears again.
4. To exit programming, press HOME
once.The display returns to the last-
selected device menu screen
.
5. Now, when you press VOL , VOL , or
MUTE, the selected device’s volume is
controlled, regardless of the mode
selected.
1. Press and hold SETUP until the two bottom IR
segments flash twice. The Program Keys
appear as SETUP flashes repeatedly.
3. Press VOL once. Press a device key
once (i.e., AUX, CBL/SAT, CD, TV, DVD,
AUDIO, VCR, or PVR) where you want
the volume controls unlocked.The two
bottom IR segments flash four times
and the Program Keys appear again.
NOTE: The programming mode is still
active as denoted by the flashing SETUP
key. If desired, use the other Program
Keys to continue programming (see Table
of Contents on page 2 for related
sections).
OFA Kameleon wRF UG rev 3.fm Page 28 Monday, September 13, 2004 11:18 AM