Owner manual

WWW.ONEFORALL.COM 11
H
ow to delete a learned function to obtain the original function?
1) Press and hold MAGIC for 3 seconds until a mode indicator (Blue LED) stays lit.
2
) Press 9 7 6.
3
) Select the corresponding device mode (e.g. TV).
4) Press the key to be deleted (e.g. red key) twice.
C
ongratulations! You successfully learned (copied) the “I/II (mono/stereo)”
f
unction from your original remote control onto your ONE FOR ALL remote
control. NOW whenever you press the “red key” (in TV mode) you will obtain
the “I/II (mono/streo)” function.
“Combi Control” settings
(combination 1 ) --> control TV + SAT (see p. 111)
(combination 2 ) --> control TV + SAT + AMP (see p. 111)
(combination 3 ) --> control TV
„Combination 1“ is programmed automatically when you set up a TV and SAT.
In Combi Control the POWER key will switch ON/OFF all devices
within the activated Combi Control Setting – simply by pressing it
for 3 seconds.
E.g. within Combi Control combination 2 you can switch OFF your
TV, SAT and AMP by by pointing towards these devices and simply
press and hold the POWER key for 3 seconds.
E
xample) How to activate “Combination 2” (See the key pad configuration
o
n page 111).
B
y now you probably have set up the ONE FOR ALL remote to control all (or most of) your
devices. Wouldn’t it be convenient if you wouldn’t have to select a device type all the time.
Y
ou can make this possible with ONE FOR ALL Combi Control. Combi Control enables you
to control up to 3 devices simultaneously (e.g control TV + SAT simultaneously).
Press and hold magic for 3 seconds until a mode indicator (Blue LED) stays lit.
3 sec.
1
Press 2 (to select combination 2).
3
Press Combi Control.
2
ONE FOR ALL Combi Control
SAT/ CBLSAT /C B L
D
TV OFF
T
V-
-
> POWER
SAT-->
POWER
SAT OFF
Master Power (in Combi Control)
AMP/TUNERAMP/TUNER
AMP OFF
AMP-
-> POWER
3 sec.
708981_URC-7140_21t_RDN-2300512:7950 Manual_gedrukt 30-05-12 10:39 Pagina 11