User Guide

ONE FOR ALL 10L UNIVERSAL REMOTE CONTROL WITH LEARNING
14 Re-assigning Device Keys
4. Press the learning key (e.g., L1) to be
deleted twice. The LED will blink twice
after the second press.
5. To clear additional functions stored on
other learning keys, repeat steps 1
through 4 (in this section).
RE-ASSIGNING DEVICE
KEYS
You can set the One For All 10L Universal
Remote Control with Learning (URC-10820
B00) to control a second TV, VCR, DVD
player, or other device. For example, to
control a TV, a cable box, and two DVDs, you
will need to re-assign the unused AUX1 key
to operate the second DVD as follows:
1. On the remote control, press and hold
SET until the LED (red light) blinks
twice, then release SET.
2. Enter 9 9 2. The LED will blink twice.
3. Press DVD once, then press AUX1 once.
4. The AUX1 key is now ready to be
programmed for your second DVD. See
“Setting Up Your Components” on
page 7.
To re-assign other device keys to the AUX1
key, repeat steps 1 through 4 by substituting
the sequence from the following chart:
You can also re-assign another unused
device key by substituting an open key for
the AUX1 key in the above chart and
performing the sequence. For example, to
re-assign an unused CBL key as a 2nd CD
key, perform SET - 9 - 9 - 2 - CD -
CBL. When a re-assignment is done, the LED
(red light) will blink twice to confirm your
choice. At that time, you will need to
program the remote control for the new
device (see “Setting Up Your Components”
on page 7).
USING KEYMOVER
The One For All 10L Universal Remote
Control with Learning (URC-10820 B00)
includes a Keymover feature that allows you
to map (or copy) keys from one mode (i.e.,
source mode) to another mode (i.e.,
destination mode).
To Re-Assign
Device
Perform Sequence
AUX1 as 2nd
TV key:
SET - 9 - 9 - 2 - TV -
AUX1
AUX1 as 2nd
VCR key:
SET - 9 - 9 - 2 -
VCR - AUX1
AUX1 as 2nd
CBL key:
SET - 9 - 9 - 2 -
CBL - AUX1
AUX1 as 2nd
SAT key:
SET - 9 - 9 - 2 -
SAT - AUX1
AUX1 as 2nd
CD key:
SET - 9 - 9 - 2 - CD -
AUX1
AUX1 as 2nd
PVR key:
SET - 9 - 9 - 2 - PVR -
AUX1
AUX1 as 2nd
AUD key:
SET - 9 - 9 - 2 - AUD -
AUX1
AUX1 as 2nd
AUX2 key:
SET - 9 - 9 - 2 - AUX2
- AUX1
OFA 10L with Learning Owners Manual.fm Page 14 Thursday, January 27, 2005 1:34 PM