User Guide

ONE FOR ALL 10L UNIVERSAL REMOTE CONTROL WITH LEARNING
10 Using Macros
USING MACROS
You can pro g r a m t h e M1 ~ M3 keys on your
One For All 10L Universal Remote Control
with Learning (URC-10820 B00) to perform
repetitive, time-consuming operations for
easy, convenient access through the press of
a single key.
Macro keys are ideal for home theater
operations, setting a favorite channel, guide
steps, or other multiple functions you would
like to control with one key press. Moreover,
each macro key can hold up to a total of 20
key presses.
NOTE: Programming a new macro over an
existing one will erase the original macro.
PROGRAMMING A FAVORITE CHANNEL
With so many channels available through
your cable or satellite system provider, you
can program a macro that directly selects a
favorite channel with one key press.
For example, let's assume your favorite cable
programs are on channel 52. Use the
following instructions to program a macro
key for direct access of this channel:
NOTE: This example assumes the TV is tuned
to the correct Input to view your cable box.
1. Press and hold SET until the LED (red
light) blinks twice, then release SET.
2. Enter 9 9 5. The LED will blink twice.
3. Select an open macro key (e.g., M1)
and press it once.
4. Press CBL once.
5. Enter the channel number: 5 2.
NOTE: If you have access to over 100 channels,
enter 0 5 2. Moreover, if the original remote
control requires you to press ENTER to change
the channel, also press ENTER after the
channel number (e.g., 0 5 2 ENTER).
NOTE: You can program up to 20 functions on
the macro keys.
6. Press and hold SET until the LED blinks
twice, then release SET.
Now when you press M1, you will instantly
see cable channel 52 on your TV set.
PROGRAMMING A MASTER POWER MACRO
In its default state, the POWER key on the
One For All 10L Universal Remote Control
with Learning (URC-10820 B00) will
individually power your home
entertainment devices on or off. However,
you can also program a Master Power Macro
onto the POWER key that will sequentially
turn on or off all the devices with a single
key press.
To Program the Master Power Macro
1. Press and hold SET until the LED (red
light) blinks twice, then release SET.
2. Enter 9 9 5. The LED will blink twice.
3. Press the POWER key once.
4. For the first device you want in the
power-on sequence, press its device
key (e.g., TV) once.
5. For the second device you want in the
power-on sequence, press its device
key (e.g., CBL) once.
6. For the Third device you want in the
power-on sequence, press its device
key (e.g., AUD) once.
7. Repeat step 6 up to seven more times to
add the other desired devices to the
power-on sequence (e.g., SAT, VCR,
DVD, CD, PVR, AUX1 and AUX2).
8. To save the settings and exit the
program, press and hold SET until the
LED blinks twice, then release SET.
OFA 10L with Learning Owners Manual.fm Page 10 Thursday, January 27, 2005 1:34 PM