User manual
2
THANK YOU
Thank you for purchasing the ONE FOR ALL Signal Amplifier. ONE FOR ALL continuously strives to develop,
produce and market high-quality innovative products to meet your needs. We hope this Signal Amplifier will
give you total satisfaction.
THE PRODUCT
The ONE FOR ALL Signal Amplifier is designed to boost the signals of your antenna or cable box, this allows you
to distribute the signal to multiple devices and/or use longer cable/cables without losing picture and sound
quality.
Below you’ll find the description of your ONE FOR ALL Signal Amplifier (see picture 1).
CONNECTING THE SIGNAL AMPLIFIER
To connect your ONE FOR ALL Signal Amplifier, please follow the steps below.
• Connect your TV(s) or other devices to the signal output (C)
• Connect your antenna / cable TV coaxial cable or other device (see picture 3) to the input (B) on the ONE
FOR ALL Signal Amplifier.
• When you connect an antenna (DVB-T / DVB-T2 / Freeview) to the input on the ONE FOR ALL Signal
Amplifier move the switch to ANT (G). When you connect a cable TV (DVB-C / DVB-C2) coaxial cable to the
input on the ONE FOR ALL Signal Amplifier move the switch to CABLE (G).
• Plug the ONE FOR ALL Signal Amplifier into the mains (A) and switch it ON (F).
• Check if the LED indicator illuminates (G).
As situations vary, please find some different examples of use (pictures 2 – 5):
An antenna coaxial cable (DVB-T / DVB-T2 / Freeview) or cable TV coaxial cable (DVB-C / DVB-C2) is
connected to the INPUT of the ONE FOR ALL Signal Amplifier. The signal will be boosted and distributed to
one TV or other device.
The coaxial output of a TV receiver (DVB-T / DVB-T2 / Freeview / DVB-C / DVB-C2) is connected to the INPUT
of the ONE FOR ALL Signal Amplifier. The signal will be boosted and distributed to one TV or other device.
An antenna coaxial cable (DVB-T / DVB-T2 / Freeview) or cable TV coaxial cable (DVB-C / DVB-C2) is
connected to the coaxial input of a TV receiver which is connected to the HDD / DVD recorder. The coaxial
output of the HDD / DVD recorder is connected with the INPUT of the ONE FOR ALL Signal Amplifier.
The signal will be boosted and distributed to one TV or other device.
FM antenna is connected to the INPUT of the ONE FOR ALL Signal Amplifier which will boost the signal
and distribute it to up to one radio tuners.
(*) It may be possible that you have to use inline coax-connectors to make the connections. (See picture).
GAIN VARIANCE
It is possible that the TV / radio receiver gets overloaded when the amplification of the signal is too much. The
result will be that the picture and sound is not clear. Turning the gain variance button (D) to the left or right will
allow you to increase or decrease the signal amplification (Gain).
HELPFUL HINTS
If the picture or sound quality is unsatisfying, please follow the helpful hints below.
• If the incoming signal is unclear, the ONE FOR ALL Signal Amplifier will not improve your picture as it will
also amplify the noise in the signal. Please contact your antenna / cable TV installer for further details.
• If the signal gets over amplified turn the gain variance button (D) to the right and then slowly to the left
and see if the picture improves.
• Check all the connections. Loose or bad connections will result in an unclear picture.
A. Fixed power plug
B. Signal input
C. Signal output
D. Gain variance button
E. ON / OFF switch
F. ANT / CABLE switch
G. LED indicator (ON / OFF)
English
1
2
3
4
5
SV_9610_ 21Languages_manual_Bram_Amplifier SV-9540 11 talen 6’99 02-11-15 10:19 Pagina 2