Universal Remote User Manual

14
One For All SmartControl Master Power
One For All SmartControl also lets you turn all the devices
you use in an activity on and off with a single key press. For
EXAMPLEIFYOUUSEYOUR46ANDSATELLITERECEIVERTOWATCH
TV, all you have to do is press and hold the -ASTER
key
for 2 seconds to turn these devices on or off once you’ve
pressed the
key for the watch TV activity.
4OUSE/NE&OR!LL3MART#ONTROL-ASTER0OWER
1. Make sure you’re in the right One For All SmartControl
mode—press the One For All SmartControl key
corresponding to the activity you’re using (watch TV,
watch movie, or listen to music).
2. Point the remote control
at the devices and press
the -ASTER
key for
at least 2 seconds.
NOTES
Your devices turn on or off in the order of the
combination listed in the One For All SmartControl setup.
After the master power sequence has been completed,
the remote control will be able to send other commands.
If one or more devices does not have a POWER key, the
power off/on sequence may be slightly delayed when the
remote control signals the device(s). This action is normal.
If you need to individually power devices on or off, select
that device (using the left or right device key) and press
the POWER key.
Excluding a device from Master Power
You can keep devices separate from the One For All
3MART#ONTROL-ASTER0OWERCOMMANDFOREXAMPLEIFYOU
want to turn your TV on and off by itself, independently of
your watch TV or watch movie activity.
4OEXCLUDEADEVICEFROMMASTERPOWER
1. Press and hold the SETUP key until the blue ring flashes
twice.
2. Press the key for the activity you want to modify.
&OREXAMPLEIFYOUWANTTOTURNADEVICEONANDOFF
independently when you’re watching TV, press the
key.
3. Use the device selection keys to highlight the device
you want to turn on/off independently.
4. Press
.
This device will no longer be turned on or off by the master
power command in this activity.
If you want to include the device in One For All
SmartControl Master Power again, just repeat steps 1–4.