User Manual

55
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
FCC guidelines help ensure that the One Drop Meter will not
affect the operation of other nearby electronic devices. Ad-
ditionally, other electronic devices should not affect the use
of your meter.
One Drop Meter complies with CISPR 11: 2009, Class B (Radi-
ated Only). Emissions of the energy used are low and not likely
to cause interference in nearby electronic equipment.
One Drop Meter meets the requirements for immunity to
electrical interference at the frequency range and test levels
including:
Electromagnetic immunity requirements as per EN 61326-2-6
and IEC 60601-1-2. The meter has been tested for immunity to
Level 3 electrostatic discharge as specified IEC 61000-4-2.
One Drop Meter has been tested for immunity to radio
frequency interference over the frequency range 80MHz to
2.5GHz at 3V/m as specified in IEC 61000-4-3.
Electromagnetic emissions requirements as per EN 61326-2-6
and IEC 60601-1-2. Its electromagnetic emission is therefore
low.
The recommended wireless security measures include AES
encryption.