User Manual
34
If it was a control solution test result, the control solution icon
will appear to the right of the test result.
Example Result:
Test results without a set time and date will be displayed on
your One Drop Meter with “--:--“ and “--/--“ in place of the time
and date. These readings will not sync to the One Drop App.
[2] Viewing All Stored Test Results Continue pressing the
One Drop Meter button to view every test result, starting from
the most recent and ending with the oldest. When you reach
the oldest reading stored on the device, you will see a brief
animation before the most recent reading is displayed again.
[3] Turning O Your One Drop Meter The One Drop Meter
will turn off automatically (time out) 30 seconds after the last
button press.
Important Cleaning and
Disinfection Procedures
9
CHAPTER
When using your One Drop Meter, avoid getting dirt, dust,
blood, control solution, water, or any other foreign substance
into the test strip port. You should wash your hands thor-
oughly after handling the One Drop Meter, lancet, One Drop
Lancing Device, or One Drop Test Strips. Your meter and lanc-
ing device should be cleaned and disinfected at least once
per week. Cleaning and disinfecting your One Drop Meter and
One Drop Lancing Device is important to prevent the spread