User Manual

27
Do not squeeze directly around the lanced area!
[6] Bring One Drop Test Strip to Blood Sample Immediately
bring the One Drop Meter with the inserted One Drop Test
Strip to the blood sample at a 90 degree angle. The test strip
fills from the tip. Do not try to smear blood on the top surface.
The One Drop Test Strip acts like a sponge and draws the
blood into itself through the sample area.
The visual fill window of the test strip will turn red indicating
blood has been absorbed in the test strip.
APPLY
BLOOD
HERE
This is the visual ll
window. DO NOT
apply blood here.