User Manual

[2] Insert a Test Strip: Insert a new One Drop Test Strip into

the One Drop Meter’s test strip port. Make sure you insert the

One Drop Test Strip, with the contact bars facing towards you,

into the test strip port. The One Drop Meter will turn on.

[3] Meter Ready For Test: The meter now displays the apply

sample to test strip animation, indicating it is now ready for

you to apply blood. You do not need to set a calibration code

for this meter.

Apply Sample to Test Strip Animation:

[4] Lance the Test Site: Keep your hand warm or gently mas-

sage the site you are lancing to stimulate blood flow.

Press the lancing device against the site to be lanced. Press

the release button.

[3] One Drop Meter Ready

For Test: The One Drop

Meter now displays the Apply

Sample to Test Strip animation

indicating it is now ready for

you to apply blood. You do

not need to set a calibration

code for this meter.

[4] Lance the Test Site:

Keep your hand warm or

gently massage the site

you are lancing to stimulate

blood flow.

Press the lancing device

against the site to be lanced.

Press the release button.

[5] Obtain a Drop of Blood: Squeeze from the base of your

finger up towards the tip, milking your finger, until a small

blood drop forms.

Apply Sample to Test Strip

animation: