User Instructions

OneAndDone Pro Remote Control Command
1. Press the SET button to turn on the unit. When the device is turned on, “Time” will appear
on the screen. Use the HR and MIN buttons to set the current time. Then press SET to confirm.
2. After confirmation, “Rotate 1-6” will appear on the screen. Use the HR and MIN buttons to
set 6 different motor start times, then press “SET” to confirm. If you want to set less than 6
different start times, use the HR button to toggle until it shows "Off".
3. After confirming the motor start time, “Rotation Time” will be displayed on the screen. Use
the HR or MIN button to set the rotation duration to 1-60 seconds and press SET to confirm.
4. Then you will see "Motor Speed" on the screen. Use the HR or MIN button to set the motor
speed. Choose from 50%, 75% and 100% (100% recommended for best performance). Then
press "SET" to confirm. You have finished setting the timer.