Assembly Instructions

ASSEMBLY INSTRUCTIONS

NOTES:

3.Put the screws on flat place or sit on the chairs to adjust it to stable state

1PC

BACK

SEAT

1 PC

LEG

2 PCS

M8*55 9 PCS

WASHER 9 PCS

ALLEN KEY 1 PC

PARTS IDENTIFICATION

1.Do not tighten the screws at first

2.Put all the screws in the holes

4. Then tighten all the screws

5.If the legs still unstable, loose the screws, adjust the legs’ direction, outward or inward

to ensure that all the four legs can touch the ground.

Thanks for your patience. Any questions, do not hesitate to contact us, we will solve it

well for you as all customers are our emperor.

PAGE 1
ASSEMBLY INSTRUCTIONS NOTES: 1.Do not tighten the screws at first 2.Put all the screws in the holes 3.Put the screws on flat place or sit on the chairs to adjust it to stable state 4. Then tighten all the screws 5.If the legs still unstable, loose the screws, adjust the legs’ direction, outward or inward to ensure that all the four legs can touch the ground. Thanks for your patience. Any questions, do not hesitate to contact us, we will solve it well for you as all customers are our emperor.
PAGE 2
ASSEMBLY INSTRUCTIONS STEP 1 E F D G B STEP 2 G D E A STEP 3 STEP 4 F