Installation Guide

11
Install ice and water leak barrier directly to sheathing and 4” up sidewall. Run shingle to the sidewall and trim to t. Install metal
ashing over last corrugaon and onto ice and water leak barrier on sidewall. Fasten through metal and shingle corrugaon and
fasten ashing to sidewall. Flash top edge of metal on sidewall with self-adhesive ashing tape making sure to correctly shingle
ashing, weather resistant barrier and cladding over metal ashing.
SIDEWALL METHOD 1
SIDEWALL METHOD 2
Install ice and water leak barrier to sheathing and 4” up sidewall. Install metal J channel a minimum of 4” up sidewall. Throat of
metal J channel should be wide enough for last shingle corrugaon to terminate into channel. Fasten through corrugaon and
ice and water leak barrier making sure not to fasten through metal J channel. Properly shingle metal J channel on side wall with
weather resistant barrier and exterior cladding.
HEADWALL
If venlaon is desired, remove bae from Ridgeline RidgeVent and install at top of shingle ush to wall. Install Apron Piece and
install metal ashing nishing as detailed above.
Run shingles up slope to wall. Install Apron Piece and Closure Strips. Install metal ashing material sealing top edge of metal
with self-adhesive ashing and fasten through top of corrugaons.