Installation Instructions
16
Elevate Roong to New Dimensions™
4900 Ondura Drive, Fredericksburg, VA 22407
Phone: 800.777.7663 FAX: 540.898.4991
www.onduline-usa.com
©2015 Onduline North America, Inc. Printed in USA K-AE263
PRODUCT DESCRIPTION DIMENSIONS
MOLDED ACCESSORIES
Slim Cap
Cap for ridge and hips, for roofs with a pitch up to 
10/12.
41-1/2 x 7’’
Closure Cap
Designed for the nishing of ridge and hip lines 
(pitch up to 10/12.
42 x 7’’
Apron Piece
Designed to provide waterghtness and venlaon 
to the ridge line (Residenal), for roofs with a 
pitch up to 8/12. Can also be used to seal the gap 
between ONDUVILLA® shingles and vercal wall 
abutment.
40-1/2 x 5-1/2’’
Verge Piece
Designed to provide a neat weatherproof seal at 
the edge of the roof. Can be used for both sides 
right/le.
41 x 4 x 4-1/2’’
OTHER ACCESSORIES
Standard Ridge
Universal soluon for ridge and hip. Does not 
require addional waterproong device. (ONDULAIr 
SLIM or foam Closure Strips recommended.)
35-1/2 x 19-1/2’’
ONDULAIr SLIM
Perforated aluminum self-adhesive tape, which 
provides addional water ghtness and assists in 
the venlaon at hips and ridges.
6” x 16’
Flashing Band
Aluminum self-adhesive ashing band with butyl 
adhesive, used for waterproong around chimneys, 
walls, skylights and other abutments or transions. 
No special tools required.
98 x 11-3/4”
Pipe Flashing
Pipe Flashing accessory used for cold or hot pipes 
protruding through roof. Can be used for other 
roof penetraons.
19-1/2 x 25” and 26-1/2 x 33’’
ONDUVILLA® Flashing 
Adapter
The ONDUVILLA® Flashing Adapter can be used in a 
variety of locaons on the roof in order to provide 
proper water ghtness. This may include chimneys, 
venlators, skylights or other roof penetraons.
16 x 42”
Closure Strips
Available in two styles: Vented or solid. Solid closure 
strips should be used whenever a waterght seal is 
necessary.
38 x 1 x 1”
ONDUVILLA® Screws
Zinc-plated steel, Phillips head screw with EPDM 
washer. Color matched with ONDUVILLA colors.
2-7/8” 
ONDUVILLA® Nails
Galvanized steel, ring-shank nail with EPDM 
washer. Color matched with ONDUVILLA colors.
3” and 4”
Available in 6 designer colors
SLATE GRAY
FOREST GREEN
TERRACOTTA 
EBONY BLACK
CLASSIC RED
SIENA BROWN
For more assistance with how to install 
an ONDUVILLA® roof, go to 
onduvilla-usa.com.










