Installation Instructions

10
HIPS TO RIDGE
Secure the waterghtness of the
detail by applying self adhesive
ashing material (Flashing Band.)
Apply a module consisng
of 2 Slim Cap porons (to
be fastened together using
Flashing Band), cung them at
the right angle in accordance
with the slope of the roof.
At the beginning of the roof, the
Verge Piece simply overlaps the
rst corrugaon of ONDUVILLA®.
In addion to the usual fastening
on top of the corrugaon, side
fastening is also necessary to
ensure against wind upli. Side
fastening comes rst, then nalize
with top fastening.
On the opposite side, the roof
may not end with a corrugaon.
Cut shingle and install a 1” x 1”
baen. Bend shingle onto baen
and fasten the Verge Piece through
the baen.
Cut the Slim Cap with an angle
of 45° and fasten it. The ridge
piece has to overlap the hips.
Overlapping
stripes
Top fastening
Side fastening
Verge Piece
Flashing Band
Apron Piece
Approx. 15-3/4”
45°
VERGE
2.4”
Gable end
1
2
3
1 2
2
1
3
Slim Cap
Slim Cap