6Q1/6Q2/6Q2L USER MANUAL 2017 02 20 1
CATALOG 1． Hardware connection :......................................................................................................... 4 2． Set screen parameters.......................................................................................................... 6 3． Set IP information.................................................................................................................. 8 4． Scan mode configuration...........................................................................
6Q1/6Q2/6Q2L USER MANUAL 1．Hardware connection : LAN mode connection: Server mode connection： 4
Wireless mode connection： 5
2．Set screen parameters Step 1: Open the Ledshow TW 2016 ,Click “set”then”set screen parameters”： Step 2 Input password”888”,then click ok : Step 3 Automatically read-back the screen parameters then click ok button then add the screen : 6
Step 4 Set the screen width and height,click”upload parameters” then prompt that “upload parameters successfully”as below: 7
3．Set IP information Step 1 Go the set screen parameters,and select the communication mode ,select the communication mode firstly ,then select the network mode, then click the “set controller IP”： Step 2 Go to the page of controller IP configuration ,write the IP information ,click “set”button ,then finish the IP setting: 8
4．Scan mode configuration Step 1 Go to set screen screen parameters then click “scan configuration”： Step 2 Select the controller scan mode according to module scan mode ,then click”upload the scan configuration”screen will display as follow： 9
5．Edit and sending program Step 1 Select the program as : picture&text ,subtitle, time zone, weather zone, timing zone and lunar calendar as following; Step 2 Click”sending” then edit the program then sending it to the controller: 10
