Operation Manual

18
3. And buttons
‐ These are the multi-purpose buttons. They are used for the temp s etting, parameter setting,
parameter checking, clock adjustment and adjustment of the timer.
‐ During running status, press
or button to adjust the setting temperature directly.
‐ Press these buttons when the unit i s on clock setting status, the hour(s) and the minute(s) of
the clock time can be adjusted.
‐ Press these buttons when the unit is on timer setting status, the hour(s) and the minute(s) of
the timer ‘ON’/’OFF’ can be adjusted.
‐ Press
and buttons at the same time and hold for 5 seconds, the buttons are locked.
‐ Press
and buttons at the same time and hold for 5 seconds again, the buttons are
unlocked.
4． button
Clock setting:
-Afterpoweron,shortpress
button to entry the clock setting interface, hour and minute icons
“88:88” flash together;
-Shortpress
button to switch hour/minute setting, press the and buttons to set the
exact hour(s) and minute(s);
-Press
button again to confirm and exit.
Timer setting:
-Afterpoweron,longpress
button for 5 seconds to entry the timer setting interface, the timer
on icon
and hour icon “88:” flash together;
-Pressthe
and buttons to set the exact hour(s).
-Press
button to transfer to minute setting, minute icon “:88” flash, press the and
buttons to set the exact minute(s).
-Press
button again to transfer to timer off setting, the timer off i con and hour icon “88:”
flash together.
-Pressthe
and buttons to set the exact hour(s).
-Press
button to transfer to minute setting, minute icon “:88” flash, press the and
buttons to set the exact minute(s).
-Press
button again to save and exit the timer setting interface.
Press
button to cancel the timer settings during the timer ‘ON’ (or timer ‘OFF’) programming.