User's Manual

OnAsset Intelligence, Inc. | 8407 Sterling St.| Irving, TX 75063
Tel: [phone] | Fax: [phone]
www.onasset.com CONFIDENTIAL Page 8 of 8
The contents of this document are proprietary to OnAsset Intelligence, Inc. You may not distribute this document in whole or part in printed, electronic or in any other form to any
third party without prior expressed written consent by OnAsset Intelligence, Inc.
Communication
Bluetooth Low Energy v5.0
Battery
Two ER14050 lithium thionyl chloride batteries
Sensors
Shock / Temperature / Humidity / Light
Environmental
Operating Temp: -40°C to 85°C
Dimensions
64.5mm x 50mm x 13mm
Weight
1.8 oz. (51g)
Attach the SENTRY 500 unit to the Sentinel 100B using the following process:
SENTINEL 100S OVERVIEW
The Sentinel 100S BLE scanning accessory that can be used to scan other
Sentinel tags and relay data to SENTRY 500 FlightSafe® devices or other
peripherals.
To use the Sentinel 100S, simply plug the tag into power using the cable and
power supply included.
Communication
Bluetooth Low Energy v5.0
Battery
Two ER14050 lithium thionyl chloride batteries
Sensors
Shock / Temperature / Humidity / Light
Environmental
Operating Temp: -40°C to 85°C
Dimensions
64.5mm x 50mm x 13mm
Weight
1.8 oz. (51g)
Align tabs on Sentinel 100B
with tabs on SENTRY 500.
Push SENTRY 500 into
the Sentinel 100B.
B.
Slide SENTRY 500
backwards to lock in place.