User's Manual

SCIBA2 User & Installation Manual Version 1.00
Technical Specifications
page 2-3
2 Technical Specifications
 Power input from 7.0 to 15VDC.
 Operating temperature range -20° to 70°C (-4° to 158°F).
 Up to two antenna RF channels.
 13.56 MHz transmission frequency conforming to ISO 14443
standard.
 ISO 14443 Type A/B and Mifare cards support.
 Bi-directional radio frequency interface between Host and
Contactless Smart Cards
 USB (or optional RS232/485) Communications interface to Host
computer.
 Flexible, software configurable microcomputer-based design.
 Integrated, sophisticated Smart Card Operating System on board.
 High security encryption system (DES/RSA) in the board’s
Operating System (with SAM option on-board).
 Signal penetrates virtually any non-conductive material - no contact
or line-of-sight required.
 Unique passive “electronics free” remote antenna for added security
and easy physical integration.
 Up to two serial COM ports.
 Up to four EMV2000 compliant “on-board” SAMs.
 Indicator Leds for Power ON, good USB link and five
programmable leds. (Two of these leds are usually used as transmit
indicators for the two RF channels)
 Up to 8 optional Digital Inputs & 16 Digital Outputs
 Compliance with FCC Section 15 and I-ETS 300 330 emission limit
requirements.
 In system programming of reader firmware to 128KB flash memory
via standard Host communication link.
 Optional open collector output (100mA max) for operation of
external relay or buzzer.
 Embedded watchdog timer and full reset on brownout.
 There are no connections with exposed plant leads. All lines are
indoor only.