User's Manual

SCIBA2 User & Installation Manual Version 1.00
System Configuration
page 3-7
3.1.3 LEDs
LED1
Green - USB link good
LED2
Red – user programmable
LED3
Red – user programmable
LED4
Red – user programmable
LED5
Red – 5V power
LED6
Green – channel 1 Antenna ON, optionally user programmable
LED7
Green – channel 2 Antenna ON, optionally user programmable
3.1.4 Jumpers
J1
Emergency jumper used to reset flash.
3.1.5 SAMs
SAM 1
SIM Connector on PCB front
SAM 2 (Optional)
SIM Connector on PCB front
SAM 3 (Optional)
SIM Connector on PCB back
SAM 4 (Optional)
SIM Connector on PCB back