User's Manual

Antenna Controller User Manual Ver. 1.00
FCC Compliance
P/N 1100031 page 2-3
1.1.7 Potentiometers
SQ
Received data Squelch control (factory set)
GAIN
Received data gain control ( optional ).
1.1.8 Diodes
D29 & D30
diode bridge’s negative diodes, These diodes
must be removed
when using center taped transformer supply (refer to
Figure 0-1
)
1.1.9 DIP Switch
SW1
RS422/485 network address selection and self diagnostics
(see section 4.5)
1.1.10 Test Points
TP1 & GND1
Received signal measuring points.